产品分类
友情链接
|
|
0755-61398660 李小姐 QQ 961888174 1430164617
深圳市粤湘孚石油化工有限公司
Shell Lubricants Clavus G
|
Shell Clavus G Oil Shell Clavus G Oil
|
Shell Clavus G is non-additive oil by hydrogenation of high-quality naphthenic base oil mineral composition. Selection of base oils and advanced refining technology gives the oil excellent performance, especially for use in the lubrication of refrigeration compressors.
|
Recommended Applications
|
Using Freon or ammonia refrigeration compressor for the refrigerant; air conditioning systems and low to high evaporation temperature of the commercial and residential refrigeration systems.
|
Performance characteristics
|
- Excellent thermal stability and oxidative stability, resistance to oil breakdown and sludge formation.
- Excellent chemical stability, and the freezer not react with refrigerant commonly used to prevent the decomposition of the refrigerant, freon refrigerant.
- Excellent lubricity, in between moving parts to maintain adequate oil film strength, and play a seal, reducing the system leaks.
- Excellent low temperature performance, if a small amount of oil being brought into the refrigeration system, low temperature region, since it has excellent low temperature performance, you can still maintain good flow conditions, will not plug the system.
|
Typical data
|
Shell Lubricants Clavus
|
G46 G46
|
G68 G68
|
Density 15 ℃ kg / l
|
0.889 0.889
|
0.894 0.894
|
Viscosity 40 ℃ mm 2 / s
|
44 44
|
65 65
|
Viscosity 100 ℃ mm 2 / s
|
5.6 5.6
|
7.0 7.0
|
Flash point (open cup) ℃
|
210 210
|
220 220
|
Pour Point ℃
|
-42 -42
|
-39 -39
|
And R12 of the flocculation point ℃
|
<-50 <-50
|
<-50 <-50
|
U-tube flow temperature ℃
|
-29 -29
|
|
|
壳牌能拿T润滑油 Shell Tonna T Oil 壳牌通拿T导轨油是由高度精炼的高粘度指数矿物油和具有粘附性的添加剂及其它特殊添加剂组合而成。是满足现今机床润滑要求的导轨油。 推荐应用 适用于所有机床部件,包括使用循环系统润滑油的轴承和齿轮箱 适用于机床液压系统(通拿T32,T68) 适用于机床导轨 性能特征 优秀的低摩擦性,可减少导轨由于“爬行”而引起的振颤; 氧化稳定性高,可在高温下使用,延长油品使用寿命; 高粘度稳定性高,机床起动时粘度低,高工作温度时仍能维持合适的粘度,减少油品泄漏; 与乳化液的分离性能得到加强,防止被乳化液冲走; 防腐蚀性能强,可有效保护机床金属表面; 防止加工工件被沾污; 优良的防磨损性能。 技术规格 满足Cincinnati Milacron P47,P50和P53的规格要求。
|