深圳粤湘孚石油化工有限公司

Features: 
RUST-BAN 310 is a multi-purpose, concentrated with emulsifying agent, usually a mixture of three to nine in the water, rust inhibitor made from an economical, water evaporated thin metal surface layer of flexible protection membrane, providing excellent for indoor protection. 
Has outstanding stain resistance and fingerprint resistance, and excellent water drainage. 
Film in contact with water, it can re-emulsify or wash to resist possible. 
Non-flammable, make the operation safer. 
Can be easily wiped off with a petroleum solvent. 
With oil or petroleum solvent mixture made of a variety of oil or solvent dilution type rust inhibitor class, and oil mixing ratio for the 1:3 (RUST-BAN: oil), and the solvent mixture ratio of 1:7 ( RUST-BAN: solvent). 

Usage: 
Can be spray, dip wash or paint applied to sweep clean, no rust in the metal surface after application, so that the free water evaporation If necessary, heat can be used to accelerate water evaporation. 
Applicable to long-term indoor protection is not packaged parts, or stained water in the process of cutting and emulsifying or broken-off piece dip wash. 
Because of its non-flammable, therefore suitable for high temperature or exposed to flame operating situations. 
Should regularly check the water and the ratio of concentrates to maintain the concentration of emulsion, test methods, can be added to magnesium sulfate or phosphate, destruction emulsion, separation of concentrates will float on the surface, while measuring the volume of water it can calculate the concentration of emulsion. 
When the manufacture of emulsion should be mixed side of the concentrates added to the water side (preferably as soft water): not to turn the water added to concentrated detergent. 
Coverage area:
3:1 Water / RYST-BAN 310 Ratio: 3:1
74 Coverage area (square meters / liter): 74


Water / RYST-BAN 310 Ratio: 5:1
Coverage area (square meters / liter): 96